Ms45.1 330ci centrifugal tune

OBD2 tunes that have been modified
Post Reply
Jarrodb103
Posts: 1
Joined: Wed Dec 18, 2019 12:33 pm

Ms45.1 330ci centrifugal tune

Post by Jarrodb103 »

Looking to see if anyone has a similar setup, and a tune I could use as a base map. I have a Active Autowerke stage 2 kit, cx38-81 charger, and I believe 42lb injectors (confirming now) and catless headers.

Looking for anything similar I can work off of.
Last edited by Renovelo on Sun Feb 23, 2020 9:34 am, edited 1 time in total.
Reason: tags
snelan
Posts: 4
Joined: Wed Oct 09, 2019 8:35 am

Re: Ms45.1 330ci centrifugal tune

Post by snelan »

Here's a tune!

This is for 30lb Ford injectors (280 150 945), ASA TM-12 supercharger @8.5psi.

I used this in my 2004 ZHP before I upgraded my pulley, and it worked pretty well. The timing is conservative here.

This tune was made using Ryan's guide, so in order to scale for larger injectors for your case, just follow that!
330i-zhp-TM12-8PSI.dme2
You do not have the required permissions to view the files attached to this post.
Renovelo
Site Admin
Posts: 291
Joined: Thu Aug 08, 2013 7:02 pm

Re: Ms45.1 330ci centrifugal tune

Post by Renovelo »

@snelan...do you have any dyno graphs before/after the pulley swap? We'd love to see them!
Az-Joe520
Posts: 12
Joined: Fri May 21, 2021 7:31 am

Re: Ms45.1 330ci centrifugal tune

Post by Az-Joe520 »

@snelan..do you think i could use this as a base tune for my turbo zhp?
User avatar
DrexelLake
Posts: 15
Joined: Sat Jul 03, 2021 8:29 am

Re: Ms45.1 330ci centrifugal tune

Post by DrexelLake »

Could I use this in my 330ci M54 with 6psi Vortech Supercharger? If so does it have SAP and O2 deletes? Thanks
2005 BMW 330ci with VF Engineering supercharger kit and headers. 66k miles.
Post Reply