MS45.1 330i ZHP ESS TS2+ Supercharger tune

[rkneeshaw]

Documented and published on github:

https://github.com/rkneeshaw/MS45.1-ESS-TS2

Huge thanks to SakhrHendawi for his intake modelling work

[itongx]

what is the boost in PSI for your setup and didn't you add a resister to MAF or it still not overflow stock MAF range ?

[rkneeshaw]

what is the boost in PSI for your setup and didn't you add a resister to MAF or it still not overflow stock MAF range ?

With the 79mm pulley I'm seeing 10-11psi of boost pre-laminova intercooler cores. MAF is completely stock, and the vehicle does overflow above 6000 RPM at full throttle, so there's some fueling compensations that happen for the last 750 RPM or so.