Page 2 of 2
Re: Ms 45.1 Burble, Launch Control
Posted: Mon May 24, 2021 6:33 pm
by 100percentjake
Side note: what are the rows/columns on your ip_iga_min_n_maf tables? Mine are columns in RPM and rows are MAF, which I assume means I'd make the top row or two negative, or just zero them out completely so it references only the base ignition table, correct?
Re: Ms 45.1 Burble, Launch Control
Posted: Mon May 24, 2021 6:43 pm
by collin.patricelli
Yeah keep at he testing. If worst comes to worst you can just turn off trailing throttle if you dont care about gas mileage.
Re: Ms 45.1 Burble, Launch Control
Posted: Mon May 24, 2021 6:46 pm
by collin.patricelli
100percentjake wrote: ↑Mon May 24, 2021 6:33 pm
Side note: what are the rows/columns on your ip_iga_min_n_maf tables? Mine are columns in RPM and rows are MAF, which I assume means I'd make the top row or two negative, or just zero them out completely so it references only the base ignition table, correct?
TunerPro flips the x and y functions in all tables. Thats just how the XDF file for it is written. Dont changing your table functions. Its a pointless effort to go through. The tables work the same way on Bytetuner as on tunerpro even with different formatting.
Re: Ms 45.1 Burble, Launch Control
Posted: Mon May 24, 2021 7:18 pm
by 100percentjake
It just clicked for me that those tables are *limits*. Sigh.
I should mention I don't particularly *care* if my car has burbles or not, and I'll probably remove them, but it seems like a fun and immediately noticeable way to learn my way around the MS45.1. Kinda fun times.
Re: Ms 45.1 Burble, Launch Control
Posted: Mon May 24, 2021 10:51 pm
by collin.patricelli
They are kinda ricey but I like them. Set them up right and they can be a scare tool