E36 m50 turbo

Post Reply
Triple-R
Posts: 6
Joined: Fri Dec 08, 2017 9:04 pm
Location: Nj

E36 m50 turbo

Post by Triple-R »

m50 turbo

Current set up
M50 with S50 crank
135mm forged rods
M54 84mm Pistons
thicker 140 head gasket and ARP studs

Turbo
Bottom mount GT35 with 40 mm extra waste gate
3 inch intercooler pipe Front mount intercooler

Fueling
60lb Bosch injectors (
Hpx mass air in 3" pipe ( http://www.pmas-maf.com/product/hpx
harry_de_best
Posts: 2
Joined: Wed Apr 01, 2020 7:56 am

Re: E36 m50 turbo

Post by harry_de_best »

did you end up figuring how to scale injectors properly?
Renovelo
Site Admin
Posts: 236
Joined: Thu Aug 08, 2013 7:02 pm

Re: E36 m50 turbo

Post by Renovelo »

I'm only assuming Triple-R is using our Domino Tuning Suite product (based on the mod list), but scaling for larger injectors on OBD1 is fairly straightforward: viewtopic.php?f=10&t=110
Post Reply