Bytetuner DME read/write speed and usb com baud rate

Need help getting started with ByteTuner?
Post Reply
agueritz
Posts: 14
Joined: Mon Apr 22, 2019 4:05 pm

Bytetuner DME read/write speed and usb com baud rate

Post by agueritz »

I've just been playing with the MS4X flasher tool and it readd and writes the ECU really quickly. On screen it shows a baud rate of 125,000 rather than the default 9600 of the USB cable settings.
So I am just wondering if I can increasr the baud rate in device manager so that Bytetuner loads can also benefit from the higher transfer speeds?
Renovelo
Site Admin
Posts: 291
Joined: Thu Aug 08, 2013 7:02 pm

Re: Bytetuner DME read/write speed and usb com baud rate

Post by Renovelo »

Unfortunately not yet. This is something we may add in the future.
Post Reply